Graphical Scenario Generation Tool (GSGT)
   Next

Graphical Scenario Generation Tool (GSGT)

User's Guide

Version 7.4.1.12

Copyright © 2011 JVN Communications, Inc.

Table of Contents

1. Introduction
1.1. What is GSGT?
1.2. GSGT relationship to SGET
1.3. GSGT for ERAM Evaluation System
2. Basics
2.1. Configuration
2.2. Starting GSGT software
2.2.1. Parameters
2.2.2. GSGT Modes
2.3. Main Window
2.3.1. Adaptation Window
2.3.2. Toolbar
2.3.3. Status Bar
2.3.4. Context Boxes
2.4. Display version and license information
2.5. Editors
3. GSGT Scenarios
3.1. Create new scenario
3.1.1. New Scenario Wizard Buttons
3.1.2. Adaptation Selection
3.1.3. Location and Name
3.1.4. Weather Selection
3.1.5. Scenario Overwrite Warning
3.2. Open existing scenario
3.2.1. Load Progression Display
3.2.2. Scenario File Loading Errors
3.2.3. ATCoach Simulation Engine Window
3.3. Edit scenario
3.3.1. Create a new object
3.3.2. Delete an object
3.3.3. Edit an object
3.3.4. Replicate object
3.4. Save scenario
3.4.1. Scenario overwrite warning
3.4.2. Save scenario before exit
3.4.3. Save Gsgt Session Log
3.5. View information about a scenario
3.6. Open Scenario Manager
3.7. Add weather scenario to GSGT scenario
4. Scenario Editor
4.1. Preferences
4.1.1. Edit preferences
4.2. Adaptation Equipment and DS
4.2.1. Equipment Editors
4.2.1.1. ARTS Equipment Editor
4.2.1.2. ATM Equipment Editor
4.2.1.3. CFAF Equipment Editor
4.2.1.4. FDIO Equipment Editor
4.2.1.5. NADIN Equipment Editor
4.2.1.6. NAS Equipment Editor
4.2.1.7. NOTAM Equipment Editor
4.2.1.8. IOT Equipment Editor
4.2.1.9. KVDT Equipment Editor
4.2.1.10. READER Equipment Editor
4.2.1.11. SWIM Equipment Editor
4.2.1.12. WMSCR Equipment Editor
4.2.2. DS Equipment Editors
4.2.2.1. DS Sector Position Editor
4.2.2.2. DS Equipment Editor
4.3. AChars - Aircraft Characteristics
4.3.1. Create and Edit AChar
4.3.1.1. AChar Attributes
4.3.1.2. AChar Climb Profiles
4.3.1.3. AChar Descent Profiles
4.3.1.4. AChar Turn Rate Profiles
4.3.1.5. AChar Max Speed Profiles
4.3.1.6. AChar Min Speed Profiles
4.4. RSIs
4.4.1. Create and Edit RSI
4.4.2. Edit objects associated with specific RSI
4.5. Radars
4.5.1. Editing Radars
4.5.2. Static Radar Messages
4.5.2.1. Static Radar Message Dialog
4.5.2.2. Inhibit Time Interval Dialog
4.5.2.3. ModifyCD2 Time Interval Dialog
4.5.2.4. ModifyASTERIX Time Interval Dialog
4.5.3. Radar Events
4.5.3.1. Radar Events Editor
4.5.4. Non-Radar Areas
4.5.4.1. Non-Radar Areas Editor
4.6. Service Volumes - ADS-B
4.6.1. Service Volume Boundary
4.6.2. Service Volume Grids
4.6.3. Static Service Volume Messages
4.6.3.1. Static ASTERIX Message Editor
4.6.3.2. Inhibit Time Interval Dialog
4.6.3.3. ModifyASTERIX Time Interval Dialog
4.6.4. Service Volume Events
4.6.4.1. Service Volume Event Editor
4.6.5. Service Volume Coverage Areas
4.6.5.1. Service Volume Coverage Area Editor
4.7. System Commands
4.7.1. Create and Edit System Command
4.7.1.1. Generic Message Editor
4.7.1.2. Flight Plan Editor
4.7.1.3. CMS System Command Editor
4.7.1.4. SWIM System Command Editor
4.7.1.5. SIGMET System Command Editor
4.7.2. System Command Context Menus
4.8. Targets
4.8.1. Create and Edit Target
4.8.1.1. Target Attributes
4.8.1.2. Target Route
4.8.1.3. Target Messages
4.8.1.4. Target Events
4.8.1.5. Target ATCoach Definitions
4.8.1.6. Target TGF Definitions
4.8.2. Target Context Menu
4.8.3. Target Conflict Message
4.9. ATCoach
4.9.1. Pilot Position Editor
4.9.2. Pilot Prompt Editor
4.9.3. PPE Editor
4.9.4. Site Definitions Editor
4.9.4.1. Generic Site Definitions Editor
4.9.4.2. Point (PT) Site Definition Editor
4.9.4.3. Macro Route (RT) Site Definition Editor
4.9.4.4. Runway (RW) Site Definitions Editor
4.9.4.5. Departure Profile (DP) Site Definitions Editor
4.9.4.6. Non-ILS Arrival Procedure (AI) Site Definitions Editor
4.9.4.7. Missed Approach Procedure (AM) Site Definitions Editor
4.9.4.8. Published Holding Pattern (HP) Site Definition Editor
5. Weather Editor
5.1. Basics
5.1.1. Weather Time Slice Windows
5.1.2. Weather Context Boxes
5.2. Create new weather scenario
5.2.1. Location and Name
5.2.2. Weather Time Slices
5.3. Open existing weather scenario
5.4. Edit weather scenario
5.4.1. Wind Editor
5.4.2. Temperature Editor
5.4.3. Pressure Editor
5.4.4. Precipitation Editor
6. Site Definition Editor
6.1. Load adaptation
6.2. Create new site definition file
6.3. Open existing site definition file
6.4. Edit site definitions
6.5. Save site definition file
7. Preview
7.1. Full Preview
7.2. Target Preview
7.3. Show Route Display
7.4. Dynamic Simulation (DYSIM)
8. Import Functions
8.1. Import GSGT Scenario
8.2. Import NAS Simulation
8.3. Import DYSIM
8.4. Import NAS SAR
8.5. Import ERAM SAR
8.6. Import RTF Scenario
8.7. Import TGF Scenario
9. Export Functions
9.1. SDRR Export
9.2. NAS SIM Export
9.3. TGF Export
9.4. SIME Export
9.4.1. Export Dialog
9.4.1.1. Main
9.4.1.2. Assignments
9.4.1.3. Facilities
9.4.1.4. Overwrite ADS-B Values
9.4.1.5. Overwrite Options
10. Reports and Tools
10.1. Gsgt Session Log
10.2. Sorted Scenario Listing
10.3. Message Injection Report
10.4. Conflict Report
10.5. EMSAW/TAV Conflict Report
10.6. Paired Target Display
10.7. Simulated Target Position
10.8. Dynamic Message Report
10.9. FAV Traversal Report
10.10. EMSAW/TAV Traversal Report
10.11. Active/Inactive Report
10.12. Track Load Duration
10.13. Simulated Radar Target Count
10.14. Equipment Message Count
10.15. Facility Track Count
10.16. Sector Track Count
10.17. Scenario Track Count
10.18. Ghost Pilot Script Report
11. Utilities
11.1. exportatcoach utility
11.2. gsgtmanager utility
11.3. uplevel utility
11.4. guplex utility
11.4.1. Utility Startup Environment and Directories
11.4.2. Performing Scenario UpLevel Operations
11.4.2.1. UpLevel Options
11.4.2.2. UpLevel Changes File
11.4.3. Performing Export ATCoach Operations
11.4.4. Saving/Managing guplex Files
12. Error Messages by Function
12.1. Import NAS SIM / DYSIM Errors
12.2. Import TGF Errors
12.3. Import SAR Errors
12.4. Import RTF SIM Errors
12.5. Scenario Edit Errors
12.6. Scenario Save Errors
12.7. Scenario Open Errors
12.8. Scenario Manager Errors
12.9. Import GSGT Scenario Errors
12.10. Scenario New / Open Errors
12.11. Export SDRR - Write SIM Tape Errors
12.12. Write (Export NAS) SIM Tape Errors
12.13. Export SIME Errors
12.14. Export FIRS Errors
12.15. Export TGF Errors
12.16. Preview Errors
12.17. Reports Errors
12.18. Print Errors
12.19. Software Update Errors
12.20. Update Database Errors
12.21. WX Open / New Errors
12.22. WX Save Errors
12.23. General Errors
12.24. Display / Drawing Errors
12.25. Help Errors
12.26. CREATE ROUTE Errors
   Next
   1. Introduction